Mikrotik routerboard setup manual#
Here is a manual way to configure the Mikrotik hap lite settings. Namely by using the Quick Set menu as shown below. In making the Mikrotik hap lite configuration to be used as a hotspot voucher you can use two methods. Port 2, 3 Mikrotik and Wifi Mikrotik are used as aBridge.Port 4 is connected to The Mikhmon server computer> IP 192.168.200.1/24.Port 3 Mikrotik for Access Point external.Port 2 Mikrotik is connected to Access Point external.Port 1 Mikrotik is connected to Modem> IP From DHCP Server Modem.Mikrotik hAP Lite RB941-2ND Topology for Hotspot VouchersĬonfigure from mikrotik rb941-2nd hap lite to be a hotspot for hotspot vouchers, roughly the following topology we will use. Configuring the Mikhmon Server Computer IP.Add the IP Address for the Bridge and ether4.Create a new Bridge on Mikrotik hAP Lite RB941-2ND.Changing the SSID for Mikrotik hAP Lite RB941-2ND.Mikrotik hAP Lite RB941-2ND Topology for Hotspot Vouchers.If we use an access point on the Mikrotik hap lite, the coverage area can reach up to 30 meters without a hitch.įrom this specification, the Mikrotik hap lite is suitable as a hotspot voucher on a small scale, such as a coffee shop that provides a wifi hotspot. With this specification the Hap Lite Mikrotik is able to support the needs of a small-scale wireless network. Mikrotik hap lite RB951-2n is also equipped with an embedded access point namely Build- in Wireless 2.4Ghz (802.11b / g / n) with Internal Dual-Chain Antenna 2 x 1.5dbi.
Talking about Settings Mikrotik hAP Lite, this is one of the 900 series routerboard variants.Mikrotik RB941-2ND uses a new feature in this variant, namely Micro USB 5v, Micro USB 5v can be this Routerboard using a cellphone charger or even just by using a power bank.
0 kommentar(er)
